Map Modification And Adaptation; Additional Settings Within Map Settings - eta MASTER 2 PRO Gebrauchsanleitung

5. MAP MODIFICATION AND ADAPTATION

• Once the map is created and saved,
click „Map Edit" on the main screen on
the right.
• Select „Map Custom
displayed menu.
1
Automatic map breakdown
• If the first automatic cleaning is done
correctly, the application will automatically
propose a division into individual rooms,
which you can further edit.
The following adjustments can be made:
• A) „Merge" (using this function, you can
join 2 adjacent rooms);
• B) „Room segmentation" (using this
function, you can divide 1 room in 2
rooms);
2
• C) „Reset" will delete your map edits;
• D) „Name" (using this function, you can
arbitrarily name rooms);
• E) „Custom" (it is possible to specify in
detail, with which settings the vacuum
cleaner has to clean up
a respective room);
• F) „Order" (the setting of the room order,
in which these rooms will be cleaned up).
A) Merging rooms:
• Click on „Merge" and select 2 adjacent
rooms.
3
• Then confirm the selection by clicking on
„Merge". Correct completion is signaled
by a merge success notification.
Editing" from the
4
5
6
B) Room segmentation:
• Click on „Split", select the room you
want to split and set the dividing line
7
using the edge wheels of the line
segment.
• Then confirm the selection by clicking to
„Split". Correct completion is signaled
by a split success notification.
D) Room name
• Click on "Room edit" and then click to
select the room you want to edit the
name of.
8
• Fill in the new name of the room, or
choose from the default names and
confirm each choice by pressing
„Confirm".
• Finally, confirm the changes by clicking
„Save„.
E) Custom settings
• Click on „Custom" and choose the room
for which you want to set individual
cleaning parameters.
• You can set the vacuuming frequency,
wetting level and suction power.
• Then confirm the settings by clicking
9
„Confirm".
• This setting can only be used for
automatic cleaning and room
cleaning.
• To activate this setting, you must turn on
„Customize Mode" in the „Cleanin
Preference" section
of the app's home screen.
F) Custom order
• Click on „Order".
• After it, you may click to particular rooms
step-by-step to set the order, in which
the rooms will be cleaned up. Click
repeatedly to the same room to delete
the chosen order.
• Consequently, click on „Save" to confirm
setting.
• For custom embossing, it is necessary
to first set individual rooms within
„Custom", then save the map and
activate this setting, see the previous
step.

Additional settings within map settings

Restricted areas and virtual walls
• On the main screen, click on
• Then select „Restricted zones
in the displayed menu.
• In this menu you can set A) restricted
zones and B) virtual walls.
A) Prohibited Zones (Forbidden
It is possible to set 2 types of prohibited zones:
• „Mop forbid area" - the vacuum cleaner
will not mop in the given zone.
• „Mop and sweep" - complete ban on
the movement of the vacuum cleaner in
the given zone.
To add a prohibited zone:
• Click on the appropriate type of prohibited
zone in the menu. The restricted zone can
be moved, rotated, named and resized on
the map with your finger.
• If you want to remove an inserted
prohibited zone, click directly on it with
a finger and then click on „x".
• Finally, save the created zones by
clicking on „Save".
ENG
„Map Edit".
setting"
area)
ENG - 39