Werbung
Verfügbare Sprachen
Verfügbare Sprachen
29
For TP202 and TP203, exposure time should exceed 3 minutes.
For TP202 and TP203, exposure time should not exceed 6 minutes.
Precautions before use
Perform the following activities on your product and accessories before use.
Visually Inspecting the Scanner for Damage
Visually inspect the scanner for damage or signs of deterioration by doing the following:
Inspect the Lens Window.
Inspect around the buttons and contact points.
If damage is noted, do not use the scanner and contact your representative.
Visually Inspecting the Scanner Tip
Visually inspect the Scanner Tip for signs of deterioration by doing the following:
Verify that the Scanner Tip is not damaged, and its components are not detached.
Verify that the Scanner Tip mirror does not have any smudges or scratches on it.
If deterioration is noted, replace the Scanner Tip.
WARNING
•
The Lens Window on the scanner is a delicate optical component. Mount the front
Protective Cover to protect the Lens Window from damage and dirt when the scanner is
not in use.
•
The mirror in the Scanner Tip is a delicate optical component. Its clean and undamaged
surface is critical to scan quality.
In the event that you see poor scan quality or an unclear video preview in the software, clean
the Scanner Tip mirror and the Lens Window of the Handpiece using a microfiber cleaning
swab, applying ethanol that is free of impurities.
Safety Guide
Werbung
