Neoss NeoScan 200 Gebrauchsanweisung Seite 14

Setting Up the Scanner
Setting Up the Scanner
Setting Up the Scanner
To set up the scanner, follow these steps:
•
Visit https://support.allied-star.com/download and download the installation file and
instructions according to the product model.
•
Double-click the software installation file.
•
Choose a language from the drop-down list and click Ok to install.
•
Follow the instructions on the screen to complete the installation.
•
Firmly slide the Scanner Tip onto the end of the scanner.
•
Short press any button to start the scanner.
•
After the scanner is powered on, open the software and connect the scanner through the
wireless network.
Using the Scanner Charging Holder
The Charging Holder can be used standing on a flat plane or mounted on the wall.
Installing the Desktop Charging Holder
To place the Charging Holder on a desktop, follow these steps:
•
Select a clean surface area.
•
Insert one end of the charging cable into the bottom of the charger.
14