RADEMACHER RolloTube I-line Sun Medium Serie Original - Betriebs- Und Montageanleitung Seite 35

Preparation for use of precision tubes (Figures
4.d
STOP
4.e
- )
.a .e
4. Mark the four fastening holes and subsequently drill them through the
precision tube in the catch (10).
ATTENTION
◆ Never drill deeper than 10 mm into the catch (10).
◆ Never drill in the area of the drive. Doing so will cause serious
damage.
5. Screw or rivet the precision tube to the catch (10).
Use four self-tapping sheet metal screws, plastic screws or pop rivets.
EN
35