RADEMACHER RolloTube I-line Sun Medium Serie Original - Betriebs- Und Montageanleitung Seite 31

i
Functional description
The RADEMACHER RolloTube I-line Sun series of tubular motors are designed for the electrical
operation of awnings (extending / retracting).
The tubular motors are equipped with the new Safe-Drive system for position detection,
torque monitoring and obstacle detection. The drive's compact design and fully automatic
end point configuration ensures for straightforward and convenient installation.
The RolloTube I-line Sun impresses in daily operation with automatic fabric relief and
tensioning (with reversing), ensuring optimal safety and gentle operation.
i
Function of the fabric relief and blockage detection system
Function in the event of a fault or awning blockage:
The tubular motor stops and automatically relieves the awning by shifting briefly in the
opposite direction (reversing) in the event that the awning is blocked by an obstacle
when retracting.
NOTE
Blocked awnings may not be moved until the fault or obstacle has been dealt with.
i
Function of the fabric tensioning and obstacle detection system
Function of the obstacle detection system when extending the awning:
The tubular motor stops and automatically shifts briefly in the opposite direction in the
event that the awning hits an obstacle while opening.
Requirements for correct obstacle detection:
◆ The catch (10) must be mounted with the freewheel mechanism activated, see
Fig. ; page 33.
.a
Overview of functions:
◆ Commissioning with a single run command. Self-learning motor with fully automatic
end point configuration for the upper end point.
◆ Safe-Drive method for precise positioning, torque monitoring and obstacle detection.
◆ Blockage and obstacle detection as well as an integrated fabric relief and tensioning
system, including reversing function.
◆ Obstacle detection can be arbitrarily configured thanks to the new snap-in FlexiClick
system.
◆ Quick and easy installation thanks to the new shorter design.
◆ Optionally available: Universal RT ConfigTool for individual configuration of the
motor parameters.
Automatic fabric relief during normal operation:
During normal operation, the awning runs up to the upper end point and subsequently
shifts briefly in the opposite direction (reversing), in order to automatically relieve the
awning fabric.
NOTE
This function is only active if the upper end point is configured automatically,
see page 42.
Automatic fabric tensioning during normal operation:
During normal operation, the awning runs up to the lower end point and subsequently
shifts briefly in the opposite direction (reversing), in order to automatically tension the
awning fabric.
NOTE
This function is only active if the upper end point is configured automatically,
see page 42.
EN
31