Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
Safety instructions
Notice
The safety instructions described here also apply to the power pack NTX001
and the active backplane BPX001, BPX002 and BPX003.
Appropriate use
A module with connected transducers is to be used exclusively for
measurement tasks and Test tasks. Use for any purpose other than the above
is deemed to be non-designated, inappropriate use.
In the interests of safety, the module should only be operated as described in
the Operating Manuals. It is also essential to comply with the legal and safety
requirements for the application concerned during use. The same applies to
the use of accessories.
Before commissioning the module for the first time, you must first run a project
planning and risk analysis that takes into account all the safety aspects of
automation technology. This particularly concerns personal and machine
protection.
Additional safety precautions must be taken in plants where malfunctions could
cause major damage, loss of data or even personal injury. In the event of a
fault, these precautions establish safe operating conditions.
This can be done, for example, by mechanical interlocking, error signaling, limit
value switches, etc.
Notice
The module must not be connected directly to a power supply system. The
supply voltage must be 10 V ... 30 V (DC).
QuantumX
A02361_05_Z00_01 HBM: public
Safety instructions
3
Werbung
