HBM QuantumX MX840B Bedienungsanleitung Seite 17

or current measurement or for connecting current-fed piezoelectric trans­
ducers (IEPE / ICP(R) ).
S MX1615B/MX1616B SG bridge amplifier
The module has 16 individually configurable inputs for SGs in quarter, half
and full bridge circuits. Bridge excitation voltage DC or carrier frequency
(1200 Hz).
S MX1609KB Thermocouple amplifier
The module has 16 inputs for type K thermocouples.
S MX1609TB Thermocouple amplifier
The module has 16 inputs for type K thermocouples.
S MX809B Thermo measurement module
The module has 8 inputs for measurement of temperatures with thermocou­
ples or electrical cell voltages up to 5 V at a potential up to 1000 V in energy
storage systems. General measurement categories: 600 V CAT II, 300 V
CAT III.
The module and entire production have been certified by VDE, and stand
for maximum safety when working with dangerous voltages.
S MX403B voltage module
The module has 4 inputs with lab connectors for voltage measurement
(1000 V CAT II, 600 V CAT III).
The module and entire production have been certified by VDE, and stand
for maximum safety when working with dangerous voltages.
S MXFS8DI BraggMETER Optical Module
The module has 8 optical connections for up to 16 configurable channels/
sensors. Each channel can receive a Fiber Bragg Grating (FBG) signal.
Strain, force, temperature, acceleration and inclination can be measured.
HBM offers the complete measurement chain.
Notice
When using the modules MX403B or MX809B, please refer to the separate
operating manual, document number A3757.
S CX22B or CX22B-W (WLAN) Data recorder
The module is used for local recording of measurement data.
QuantumX
A02361_05_Z00_01 HBM: public
Introduction
15