HBM QuantumX MX840B Bedienungsanleitung Seite 16

Introduction
4.2 The QuantumX family
The QuantumX family is a modular measurement system for universal applica­
tions. The modules can be individually combined and intelligently connected
according to the measurement task. Distributed operation makes it possible to
position individual modules close to the measuring points, resulting in short
sensor lines.
The QuantumX family consists of the following modules:
S MX840B Universal amplifier
The module has 8 universal inputs and supports more than 15 transducer
technologies.
S MX440B Universal amplifier
Like the MX840B, but with 4 inputs (connections 5-8 of MX840B, without
CAN).
S MX410B Highly dynamic universal amplifier
The module has 4 universal inputs and supports commonly used transducer
technologies (at a sampling rate of up to 96,000 measured values per chan­
nel per second).
S MX430B QuantumX precision bridge measurement module. The module
has 4 inputs and supports full bridge SG-based transducers with an accu­
racy class of 100 ppm.
S MX238B Precision full bridge amplifier
The module has 2 full bridge SG inputs with an accuracy of 25 ppm.
S MX460B Digital module (counter, frequency, timer)
The module has 4 individually configurable inputs for connecting HBM
torque measurement shafts (T12, T40, T10), rotational speed sensors,
crankshaft sensors with gap (TDC sensor), pulse width modulated signals -
PWM.
S MX471C CAN/CAN FD module
The module has 4 CAN/CAN FD nodes that can be configured for receiving
and sending messages. The module supports also the CCP and xCP-on-
CAN protocols.
S MX1601B Analog amplifier (standardized voltage / current, IEPE)
The module has 16 individually configurable inputs for standardized voltage
14
A02361_05_Z00_01 HBM: public
QuantumX