Connecting individual QuantumX modules
If your PC is set to DHCP, the network is automatically configured via DHCP/
APIPA. To access the modules, launch the catman Easy/AP software, the MX
wizard or the software with the installed driver. The module scan lists all the
modules.
You will need a remote connection in order to work on the data recorder. You
can achieve this directly by entering the IP address in the application in Win
dows, Linux or Apple OS, or via the HBM Device Manager, catman software or
MX wizard by double-clicking the list of modules. For the remote connection,
please use the factory-set access data below:
User name: HBMCX22
Password: hbm
We recommend that you personalize the user data after logging on for the first
time, to prevent access by third parties.
For alternative connection options and other details, please see the QuantumX
and CX22B Operating Manuals.
22
Or
1-Kab271-3
1-Kab239-2
A02361_05_Z00_01 HBM: public
Gateway
. . .
QuantumX