Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Trouble shooting
Problem
Possible cause
No mains power supply
Appliance
Worn out carbon brushes
won't start
Motor faulty
On/Off switch (3) defective
Internal loose contact
Intermittent
Power cable damaged
operation
On/Off switch (3) defective
Collection bag (10) is full
Weak or no
Collection bag (10) is dirty
suction pow-
er/throughput
Impeller, blower (11) or suction
pipe (13) is clogged or blocked
Impeller does
Foreign body blocking the im-
not move
peller
Spare parts/Accessories
Spare parts and accessories can be obtained at www.grizzlytools.shop
If you have issues ordering, please use the contact form.
If you have any other questions, contact the "Service-Center" (see page 40).
Pos. manual
1 .......................... 25 ................................... Carrying strap ..................91100669
10 ........................ 22-24 .............................. Collection bag ..................91100668
11+12 .................. 19-21 .............................. Blower pipe + Wheels .......91100667
13 ........................ 18 ................................... Suction pipe .....................91100665
15 ........................ 17 ................................... Central pipe......................91100664
38
Pos. Exploded
drawing
Corrective action
Check the socket, cable, line, plug
and fuse and have them repaired by
a qualified electrician if necessary.
Send in to Service Centre for repair
Send in to Service Centre for repair
Empty collection bag
Clean collection bag
see „Removal of clogging
and blockage"
Remove the blockage (see „Removal
of clogging and blockage")
Description
Order No.
Werbung
