Herunterladen Diese Seite drucken

Parkside PLS 2600 B2 Originalbetriebsanleitung Seite 34

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
Installing/removing the
collection bag
In suction mode the device
can only be operated with
the collection bag installed.
Mounting the collection bag:
1. Now push the collection bag (10) on
to the ejector opening (17) of the motor
housing (5). The collection bag clicks
into place.
2. Hang the carabiner (16) of the collec-
tion bag (10) on the fastening eyelets
(14) provided on the suction pipe and
central pipe.
Removing the collection bag:
3. Remove the carabiner (16) from the fas-
tening eyelets (14) on the suction pipe
and central pipe.
4. Press the locking button (9) on the col-
lection bag (10).
5. Pull the collection bag (10) from the
ejector opening (17).
Putting on the carrying
strap
Never wear the carrying
strap diagonally across your
shoulders and chest: only
wear it on one shoulder to
ensure you can detach the
device quickly from your
body in the event of danger.
1. Place the carrying strap (1) on one
shoulder.
2. For ergonomic working, adjust the
carrying strap (1) individually to your
body size.
3. Attach the carabiner (1a) on the eyelet
(19) to insert the strap.
34
Operating the leaf
blower
Danger of injury. Wear suita-
ble clothing and work gloves
when working with the
device. Make sure that the
device is functioning prop-
erly before every use. Make
sure that the collection bag
and the tube are assembled
correctly and the carrying
strap is adjusted correctly for
work.
Stop using the device if the
on/of switch is damaged.
Personal protective equip-
ment and a fully functional
appliance reduce the risk of
injuries and accidents.
After switching off the de-
vice, the impeller wheel
continues to rotate for some
time. Danger of injury due to
rotating tool.
Note noise protection laws and lo-
cal regulations.
Changing mode
Vacuum mode
1. Slide the mode switch (8) to position
.
Blowing mode
2. Slide the mode switch (8) to position
.
Turning on and off
Before switching on device, make
sure it is not in contact with any ob-
jects. Ensure stable positioning.

Werbung

loading