Herunterladen Diese Seite drucken

Parkside PLS 2600 B2 Originalbetriebsanleitung Seite 26

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
Air speed ........................max. 270 km/h
Air suction volume ............max.12 m
Chopping rate ................................ 10:1
Collection bag .................... approx. 34 l
Protection class ................................
Protection category........................... IPX0
Weight (incl. accessories) ..................3 kg
Sound power level (L
guaranteed ................................ 98 dB
Blow mode
Sound pressure level
(L
) ....................... 81.7 dB; K
pA
Sound power level (L
measured ...........94,1 dB; K
Vibration (a
)
h
handle ..............2.54 m/s
T handgrip ........2.82 m/s
Suction Mode
Sound pressure level
(L
) ....................... 83.5 dB; K
pA
Sound power level (L
measured ...........96,3 dB; K
Vibration (a
)
h
handle ..............2.52 m/s
T handgrip ........2.72 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
26
3
/min
)
WA
= 3 dB
pA
)
WA
= 2,28 dB
WA
2
; K= 1.5 m/s
; K= 1.5 m/s
2
= 3 dB
pA
)
WA
= 2,05 dB
WA
; K= 1.5 m/s
2
2
; K= 1.5 m/s
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
II
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Safety instructions
This section describes the basic
safety rules when working with the
device.
2
2
Symbols and icons
Symbols on the appliance
Warning!
Read the manual.
2
2
For safety reasons, both
suction tube sections and
the collection bag must be
attached before starting the
device!
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger
area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the power plug
before maintenance and
repair work.

Werbung

loading