Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
mediately switch off the unit
in an emergency. Improper
use of the unit may lead to
serious injury.
• This device is not intended for
use by children, individuals
with limited physical, sensory or
mental capabilities, those with
insufficient experience or knowl-
edge or individuals who are not
familiar with the instructions.
Children should be supervised
to ensure that they do not play
with the device. Cleaning and
maintenance must not be car-
ried out by children.
• If the mains connection cable of
this device is damaged, it must
be replaced by the manufac-
turer or their customer service or
by a similarly qualified person
in order to avoid hazards.
• The device must not be used at
altitudes over 2000 m.
Preparation:
• Never let children or persons
who are not familiar with these
instructions use the machine. Lo-
cal regulations may restrict the
age of the operator.
• The personal protective equip-
ment protects your own health
and the health of others and
ensures trouble-free operation of
the device.
- Wear suitable working clothes
such as robust footwear with
anti-slip soles, rugged, long
trousers, gloves, protective gog-
gles and hearing protection.
Wear this at all times while op-
28
erating the machine. Do not use
the device if you are barefoot
or are wearing open sandals.
Wear respiratory protection if
you are working in a dusty en-
vironment. Wear a dust mask.
- Refrain from wearing loose
clothing or jewellery that could
be drawn into the air intake
nozzle. If you have long hair,
use protective head covering.
• Pay attention to open windows,
children, pets, etc. Stop working
if children and pets are nearby.
The blown material may fly in
their direction. Maintain a safe-
ty distance around you of 5 m.
• Make yourself familiar with your
surroundings and pay attention
to possible dangers which, un-
der certain circumstances, can
be missed while working.
• Carefully inspect the surface
to be cleaned and remove all
wires, stones, cans and other
foreign bodies.
• Before commencing blowing/
sucking, release foreign bodies
with a broom or rake.
• Use the entire blow nozzle, so
the airflow can work close to
the ground.
• In very dry conditions, dampen
the surface slightly in order to
reduce the strain from dust.
• Do not work with a device
which is damaged, incomplete
or altered without the approval
of the manufacturer. Check the
safety status of the device be-
fore use, in particular the power
cable and the switch.
• Employ the device in a complete-
ly assembled condition only.
Werbung
