Pixsys ATR144 Installationsanleitung Seite 89

163
M.s.p.F.
Selects the format used by the ATR144 (when
operating in master mode) during modbus RTU serial
communication
8-N-1
8-E-1
8-o-1
8-N-2
8-E-2
8-o-2
164
VAr. 1
Selects the variable 1 used by the ATR144 in master
mode.
----
W. Pro.
r.W.c.SE.
w.c.ou.p .
r.W.A1.s.
W.cons.
r. Pro.
165
V. 1 .ad.
Sets the address used by the master to write/read VAR . 1
0...65535
166
L.L.v. 1
Lower range limit used for rescaling variable 1
-9999..+30000 [digit
sensors), Default: 0.
Master Serial Port Format
8 bit, no parity, 1 stop bit (Default)
8 bit, even parity, 1 stop bit
8 bit, odd parity, 1 stop bit
8 bit, no parity, 2 stop bit
8 bit, even parity, 2 stop bit
8 bit, odd parity, 2 stop bit
Variable 1
Reserved
Write Process (Default)
Read/write command setpoint
Write command output percentage
Read/Write Alarm 1 setpoint
Write constant
Read Process (remote process from
modbus master)
Variable 1 Address
Default: 1000
Lower Limit Variable 1
1 p. 101 ] (degrees for temperature
User manual - ATR144 - 89