Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DESCRIPTION
1 Blade 3 teeth
2 Nylon spool
3 Blade and spool guard
4 Knife
5 Trees
6 Ignition button
7 safety lever
8 Trigger
9 Handle
10 Start handle
11 Chokes
12 Air filter
13 Candle
14 Fuel tank cap
15 gas tank
16 "Hedge trimmer" accessory
17 Hedge trimmer blade guard
18 Handle lock lever adjustment
19 Chain
20 Guidance
21 Guide protection
ASSEMBLY AND ADJUSTMENTS
• Unpacking
Attention! The package contains sharp
objects. Be careful when unpacking. Remove
the brushcutter and the supplied accessories
from the packaging. Check the good condition
of the machine. Ensure that all accessories
have been delivered. In the event of missing
parts, the machine and accessories must be
returned in the original packaging to the store
where the purchase took place.
Do not throw away the packaging but keep it
during the warranty period and then recycle or
dispose of it without polluting the environment.
Do not let children play with empty plastic bags
due to the risk of suffocation.
• Handle assembly
Align the two axes in the tubes. Make sure that
the 2 pins fit together correctly and that they
are not bent during the assembly operation.
Check that the hole and the locking system
located on the handle, at the level of the wheel,
are aligned.
Once the tubes are in place, insert the knob
and turn it clockwise to tighten the handle
firmly.
Check that the two parts of the tube are firmly
assembled by trying to separate them in
opposite directions.
91
Werbung
