Herunterladen Diese Seite drucken

Central Park 10112255 Übersetzung Der Originalanleitung Seite 83

Thermischer bürstenschneider 4 in 1

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

b) Inclination of the branch
c) Wind direction (do not shoot against
Strong wind)
d) Damaged wood
5) Cut from top to bottom
Care instructions
Take care to make as little noise as possible
and to limit contamination when using the
multi-tool. In particular, check the correct
adjustment of the carburettor.
Clean the multi-tool regularly and check that all
screws and nuts are tight.
Never carry out maintenance on the multi-tool
and do not store it near open flames.
Always store the multi-tool in closed rooms
after emptying the fuel tank.
Observe relevant accident prevention
instructions published by trade associations
and insurance companies.
Do not make any modifications to the multi-
function tool, as this could compromise your
safety.
The performance of maintenance or repairs by
the user is limited to the activities described in
the instruction manual. Any other task should
be performed by an authorized service agent.
Use only original spare parts and accessories
supplied by MAXEDA
The use of non-approved accessories or tools
increases the risk of an accident.
MAXEDA will not accept any liability for
accidents or damage caused by the use of
unapproved attachments and attachment
devices or accessories.
FIRST AID
In the event of an accident, ensure that a first
aid kit is close to the cutting operations.
Immediately replace any items taken from the
first aid kit.
When requesting assistance, please
provide the following information:
Scene of the accident
What happened ?
Number of people injured
Types of injuries
Your name
SAFETY INSTRUCTIONS
WARNING: When using the tool, safety rules
must be observed. For your own safety and
that of others, read these instructions before
using the tool. Keep these instructions in good
condition for future use.
1. Before using the machine
a) Before using this machine, it is important to
read this manual carefully in order to become
familiar with the handling of the brushcutter.
b) The machine should only be used for cutting
grass and luscious plants, and also for pruning
trees, hedges and shrubs. Never use this
machine for other purposes. Never use the 3-
tooth blade to cut woody vegetation.
c) Use the machine only in good physical
condition. Never use it under the influence of
alcohol, drugs, medication or in a state of
fatigue.
d) Never use the machine in enclosed spaces
due to the risk of gas poisoning. Carbon
monoxide is an odorless gas.
e) Never use the machine under conditions
such as those described below:
• Never use the machine when the ground is
slippery. Maintain correct posture and balance
at all times. This allows for better control of the
tool in unexpected situations.
• Only operate the machine in daylight or good
artificial light. Do not use the machine at night.
• Do not expose the brushcutter to storms or
rain and do not use it on wet grass.
• When using for the first time, be sure to
familiarize yourself with the handling before
starting the machine.
f) Remain alert and focused at all times. Use
common sense when using. A moment of
inattention while operating the tool can result in
serious personal injury.
g) Limit the time of use of the brushcutter to 30
or 40 minutes per session with a break time of
10 to 20 minutes.
h) Always make sure you have the manual
close at hand so that you can consult it if
necessary.
i) Always hand over the instruction manual
when lending or selling the machine.
j) Never allow children or untrained persons to
use this tool.
k) Avoid operating the machine while people,
especially children, are nearby.
83

Werbung

loading

Diese Anleitung auch für:

Cpt33-4/1/el