Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL CHARACTERISTICS
• Engine
Engine type 2-stroke petrol engine
air-cooled single cylinder
Displacement
Nominal power
Engine speed at idle
Motor speed at frequency
rotation max. spindle speed
Max speed spindle speed
Launcher
Fuel type Gasoline/oil mix
Spark plug type
Tank capacity
Fuel consumption at max power. engine weight
Machine weight in brushcutter mode (without fuel)
6.50 kg
Machine weight in edge trimmer mode (without fuel)
6.50 kg
Machine weight in hedge trimmer mode (without
fuel) 6.8kg
Machine weight in chainsaw (without fuel) 6.2 kg
Extension weight: 0.76kg
• Grass trimmer / brush cutter
Max speed of the blade
Max speed cutting head speed
Max cutting width
Direction of rotation Anti-clockwise (seen from
above) Blade diameter
Blade bore
Blade thickness
Nylon thread thickness
Weight (without fuel, without cutting device and
protector)
• Pole pruner
Max cutting length
Guide length
Chain speed
Oil tank capacity
Chain pitch
Chain gauge
Drive sprocket
Chain type
Guide type
Weight (without fuel or cutting device) 1.72 kg
• Hedge trimmer
Cutting length
Blade speed
1E36F
32,5 cm³
0.95kW/7500min
-1
3000 min-1(+/-200min
-1
)
-1
9500 min
-1
10000 min
Startup
40:1
TORCH L7RTC
800 cm³
530 g/h
-1
10000 min
10000 min
-1
430 mm (cutting head)
255 mm (3-tooth blade)
255 mm
25.4 mm
1.4 mm
2.4 mm
1.9 kg
200mm
254mm
15.5m/sec
130 cm³
9.525 mm (3/8'')
1.27 mm (0.05'')
7 teeth×9.525 mm (3/8'')
JL9D-3*39
ZLA10-39-507P
390 mm
-1
1400 min
Cutting capacity
Blade brake
Cutting angle adjustment
Weight (without fuel)
• Noise and vibration
Guaranteed sound power level:
Sound pressure level (L
PAav
Sound power level (L
)
WA
Uncertainty
Max vibration level
Front grip
Rear handle
Uncertainty
The declared total vibration value
has been measured in accordance with a
standardized test method and may be used to
compare one tool to another; indication that the
declared total vibration value may also be used
for an assessment preview of the exhibition.
The vibration emission during actual
use of the power tool may differ from the
declared total value, depending on the methods
of use of the tool; and signifying the need to
identify safety measures to protect the operator,
which are based on an estimate of exposure
under actual use conditions (taking into account
all constituent parts of the operating cycle, such
as the tool stoppage and idle operation times, in
addition to the tripping time).
NOTE: This product is not intended for
professional use.
24mm
< 2 sec.
-75° to 90°
(11 slots)
2.245 kg
111dB (A)
)
92.2 dB(A)
104.2 dB(A)
K 3 dB(A)
8.723 m/s²
8.763 m/s²
K 1.5 m/s²
90
Werbung
