System Description; General Description; Intended Application Area; Technical Data - bürkert 3232 Bedienungsanleitung

Type 3232, 3233, 3233 K, 3234,
3235, 3239

System description

5 sysTem DescripTiOn
5.1 general description
Type 3232, 3233, 3233 K, 3234, 3235 and 3239 is a manually con-
trolled diaphragm valve with diaphragm seal. The valve is self-draining
in appropriate installation position.
5.2 intended application area
The diaphragm valve of Type 3232 is designed for the control of con-
taminated and aggressive media. The valves of Type 3233, 3233 K,
3234, 3235 and 3239 can be used even for ultra-pure or sterile media
with a higher viscosity.
The valves may only control media which do not attack the body and
seal materials (see type label). Information on the resistance of materials
to the media is available from your Bürkert sales office.
6 Technical DaTa
6.1

conformity

Type 3232, 3233, 3233 K, 3234, 3235, 3239 conforms with the EC
Directives according to the EC Declaration of Conformity.
6.2

standards

The applied standards, which verify conformity with the EC Direc-
tives, can be found on the EC-Type Examination Certificate and / or
the EC Declaration of Conformity.
6.3 Operating conditions
Warning!
danger of bursting from overpressure.
If the device ruptures, the medium may cause injuries, chemical
burns or scalds!
▶ Do not exceed the maximum medium pressure. Observe specifi-
cations on the type label!
▶ Observe permitted ambient and media temperature.
english
7