Austroflamm Perry Betriebsanleitung Seite 60

21 | Start up log
21 Start up log
Operator / Customer
Name
Street
Town and postal code
Telephone
Email
Pellet stove
Model
Serial number
Technical defects
Visual defects
Accessories / defects (SmartSpot, air distribution module, etc.)
On-site conditions
Socket earthed (see electric installation test certificate)
Type of chimney: [ ] brick [ ] stainless steel [ ] firebrick
Chimney diameter: ______chimney flue height: ______
Chimney flue – Approved by chimney sweep: [ ] yes [ ]
no
Controlled living space ventilation [ ] yes [ ] no
Other:
Appliance – Preparation for Start, Functional Check
Pellet hopper loaded
Pellet quality: e.g. OE standard, DIN plus,
ENplus A1
Riddle grate function tested
Keramott "burnt white"
after trial
Firebox door seal checked [ ] yes [ ] no
Instructions for Operator / Customer
Instructions for handling the appliance explained
clearly and comprehensibly
Terms of the guarantee and warranty explained
[ ] wire brush [ ] glove
[ ] user instructions
The end customer confirms that they can now put the stove into operation unassisted. They further
confirms that the stove is in a fully functional state and free of defects.
_____________________
Place, date
60
EN
Dealer / Engineer
Company
Street
Town and postal code
Telephone
Email
Control software version
Control panel software version
WLAN Box software version
WLAN module [ ] yes [ ] no
Number of elbows:
Total length of flue pipes:
Flue pipes in plug-in system
[ ] with seal lip [ ] without seal lip
Sea level:
Chimney flue-/draught:
Actual value:_________ Target value: 3-12 Pa
Flue pipe diameter:
Outside temperature for draft measurement:
Induced draught fan function tested
Screw motor function tested
Ignition cartridge function checked
Partial load test carried out
Cleaning and maintenance interval explained
Photographic documentation of actual condition –
hybrid stove installation (Please be sure to obtain
the customer's consent beforehand)
(Start, combustion and burnout phases carried
out.)
______________________
Signature Operator / Customer
Operating manual Perry
____________________
Signature Technician