Austroflamm Perry Betriebsanleitung Seite 31

Operating manual Perry
11 Commissioning
11.1 First start-up
1) The pellet stove must be connected to the chimney. Sufficient combustion air must be supplied.
2) Remove the accessories from the pellet hopper and the firebox.
3) Fill the hopper with pellets and close the hopper lid.
NOTICE
In certain models a safety switch monitors the proper closing of the hopper lid and warns the user if it
stays open.
EN
4) Insert power cable and set tumbler switch on the back
of the hybrid stove to "I".
ð The Austroflamm logo will now appear on the dis-
play.
ð This is followed by the main operating level with
temperature displays and hopper level.
5) The pellet screw conveyor must be filled before the
first start-up.
ð For more detailed information see menu item:
Manual pellet feed [}on page 42]. This process
takes approximately 5 minutes.
6) To start the pellet stove, press "Start" on the display.
11 | Commissioning
31