Austroflamm Perry Betriebsanleitung Seite 35

Operating manual Perry
12.3.3 Display - status display
1
Fig. 37: Status display
1 Status line
3 Room temperat-
ure display
12.4 Functions
12.4.1 Function - controlling the strength of the fan
12.4.2 Function - filling level indicator
2
3
2 Start / stop func-
tion
EN
The stove is started or stopped by pressing the start / stop
button for longer than 2 seconds.
The filling level indicator keeps you informed of the filling
level of your pellet hopper. If the filling level falls below a
certain level, a warning is shown on the display. Each time
that the hopper is filled, the filling level must be manually
updated.
Completely emptying the hopper should be avoided, since
the flame will otherwise go out unintentionally and you will
have to manually fill the screw conveyor before the next pel-
let start.
The filling level indicator is calculated on the basis of the
size of your stove's pellet hopper and the particular operat-
ing time. Correct functioning can only be guaranteed when
the hopper is always completely filled and the display is set
at the same time to "FULL".
Press the filling level symbol in the room temperature dis-
play to set the display to "FULL".
This function can be disabled in the "Menu item: Fuel" set-
ting.
12 | Operation
35