Mounting The Front Panel - hanseatic HGVI6086B166901S Gebrauchsanleitung

page EN-32 Set-up, connection and initial start-up

Mounting the front panel

You can mount a stainless steel front panel
on the appliance door or one which match-
es your kitchen. The front panel must have a
weight of 5–9 kg.
1. Lay the supplied drilling template on the
back of the front panel in such a way that
the drilling template and the front panel
are flush at the top.
2. Transfer the drill holes from the drilling
template to the front panel.
3. Drill the drill holes in the indicated posi-
tions using a drill bit (Ø 2 mm).
(50) (45)
4. Affix both installation hooks (50) with four
screws (45) each onto the front panel.
5. Affix both mounting pegs (51) using the
screws (47) onto the front panel.
(47)
(51)
6. Hang the furniture front panel on the ap-
(50)
7. Remove the 4 screws from the inside of
The front panel has been successfully mounted.
pliance door, hold it firmly and carefully
open the appliance door.
(46)
the appliance door. Screw the front panel
in place at these positions using the 4 en-
closed screws (46).