Declarations Of Conformity; Related Documents - ABB ACS880-04 Kurzanleitung Für Die Installation

268 Technical data and references

Declarations of conformity

EU Declaration of Conformity
Machinery Directive 2006/42/EC
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following products:
Frequency converters
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
with regard to the safety functions
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
are in conformity with all the relevant safety component requirements of EU Machinery Directive 2006/42/EC, when the listed safety functions are
used for safety component functionality.
The following harmonized standards have been applied:
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
EN IEC 62061:2021 Safety of machinery – Functional safety of safety-related control systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
The following other standards have been applied:
IEC 61508:2010, parts 1-2 Functional safety of electrical / electronic / programmable electronic safety-
related systems
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
The product(s) referred in this Declaration of conformity fulfil(s) the relevant provisions of other European Union Directives which are notified in
Single EU Declaration of conformity 3AXD10000497831.
Authorized to compile the technical file: ABB Oy, Hiomotie 13, 00380 Helsinki, Finland.
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division
Manager
ABB Oy
Document number 3AXD10000099646

Related documents

Name
ACS880-04 drive modules (200 to 710 kW, 300 to 700 hp) hardware manual
ACS880-04 drive modules (200 to 710 kW, 300 to 700 hp) quick installation guide
ACS-AP-I, -S, -W and ACH-AP-H, -W assistant control panels user's manual
ACS880 primary control program firmware manual
Drive Composer start-up and maintenance PC tool user's manual
Converter module capacitor reforming instructions
You can find manuals on the Internet. See below for the relevant code/link. For more
documentation, go to www.abb.com/drives/documents.
ACS880-04 manuals
ABB
Aaron D. Wade
Product Unit Manager
ABB Oy
Page 1 of 1
Ecodesign information (EU
2019/1781 and SI 2021 No. 745)
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following products:
Frequency converters
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
with regard to the safety functions
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
are in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed
safety functions are used for safety component functionality.
The following designated standards have been applied:
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
EN IEC 62061:2021 Safety of machinery – Functional safety of safety-related control systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
The following other standards have been applied:
EN 61508:2010, parts 1-2 Functional safety of electrical / electronic / programmable electronic safety-
related systems
EN 61800-5-2:2017 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001326405.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Helsinki, August 31, 2022
Signed for and on behalf of:
Mika Vartiainen
Local Division
Manager
ABB Oy
Document number 3AXD10001329538
Page 1 of 1
ACS880 China RoHS II DoC
ABB
xxxxxxxxxxxxxxxxxxxxxxxxxxx
Aaron D. Wade
Product Unit Manager
ABB Oy
Code
3AUA0000128301
3AXD50000009366
3AUA0000085685
3AUA0000085967
3AUA0000094606
3BFE64059629