Declaration Of Conformity - ABB ACS880-01 Hardwarehandbuch

290 Funktion "Sicher abgeschaltetes Drehmoment"

Declaration of Conformity

Supply of Machinery (Safety) Regulations 2008
We
Manufacturer:
Address:
Phone:
declare under our sole responsibility that the following products:
Frequency converters
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
with regard to the safety functions
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
are in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed
safety functions are used for safety component functionality.
The following harmonized standards have been applied:
EN 61800-5-2:2007
EN 62061:2005
+ AC:2010 + A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1:2018
The following other standards have been applied:
IEC 61508:2010, parts 1-2
IEC 61800-5-2:2016
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001326405.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Helsinki, May 7, 2021
Signed for and on behalf of:
Document number 3AXD10001329538
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ABB Oy
Hiomotie 13, 00380 Helsinki, Finland.
+358 10 22 11
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Safety of machinery – Functional safety of safety-related electrical, electronic and
programmable electronic control systems
Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
Functional safety of electrical / electronic / programmable electronic safety-
related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
Tuomo Tarula
Local Division Manager, ABB Oy
xxxxxxxxxxxxxxxxxxxxxxxxxxx
Aaron D. Wade
Product Unit Manager, ABB Oy
Page 1 of 1