Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning In The Dishwasher - Silvercrest SKMH 1100 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SKMH 1100 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note: The seal for the drip tray 5 must
be mounted in such a way that the label
"BACK" is no longer visible.
8. Replace the seal 24 in the lid of the
blender jug 25.
Note: The seal 24 in the lid of the
blender jug must be positioned so that
the smooth side is inwards.
9. Replace the seal 19 in the blade
assembly 20.

10.4 Cleaning in the dishwasher

The following parts are suitable for cleaning
in a dishwasher:
— blender jug 6
— lid for blender jug's fill opening with
measuring scale 26
— lid for blender jug 25 without its seal 24
— blade assembly 20 without its seal 19
— cooking pot 21
— mixer attachment 22
— spatula 23
— drip tray 4 without its seal 5
— steamer basket, deep 3
— steamer basket, shallow 2
— lids for steamer baskets 1
Under no circumstances may any of
the following parts be cleaned in the
dishwasher:
• base unit 17
• seals
10.5 Descaling
If you steam with very hard water,
especially, the parts used, particularly those
in the blender jug 6, can become covered in
limescale.
1. Remove mild limescale deposits by
wiping them off with a little household
vinegar on a cloth.
2. Rinse off with clean water.
If significant deposits of limescale have
already accumulated, remove these urgently
to ensure the appliance works properly.
Limescale
can
considerably.
Caution! Do not use commercial descaling
products, pure acetic acid or vinegar
essence.
3. To get rid of significant limescale, we
recommend putting 500 ml white table
vinegar and 500 ml boiling water in a
suitable container, such as a plastic
bowl, and to leave this to act on the
parts covered in limescale for 30 min.
Note: longer soaking times will not
improve descaling, but may permanently
damage the parts.
4. Rinse off with clean water.
5. Allow parts to dry completely before
using them again.
10.6 Ordering seals
Seals for the lid of the blender jug 24, the
blade assembly 19 and the drip tray 5 can
be ordered from our Service Centre (see
" Service Centre" on page 101).
impair
performance
97

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis