Battery And Charging - Verefa V60M Pro Gebrauchsanleitung

Battery and charging

・ The auto-empty base must be removed from the socket-outlet before cleaning or maintaining the
appliance.
WARNING: For the purposes of recharging the battery, only use the auto-empty base (model: SD01 &
SD02) provided with this appliance.
・ The auto-empty base only for charging Li-ion battery (Max. 2600mAh) of robot cleaner.
・ Do not charge non-rechargeable battery.
・ The appliance and battery use and storage, and charging system during charging in ambient
temperature range 4℃~40℃.
・
For indoor use only.
・ Battery type of remote controller: AAA .
・ Non-rechargeable batteries are not to be recharged.
・ Different types of batteries or new and used batteries are not to be mixed.
・ Batteries are to be inserted with the correct polarity.
・ Exhausted batteries are to be removed from the appliance and safely disposed.
・ If the appliance is to be stored unused for a long period, the batteries are removed.
・ The supply terminals are not to be short-circuited.
Polarization instructions :
・ To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do
not change the plug in any way.
SAVE THESE INSTRUCTIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
・ Reorient or relocate the receiving antenna.
・ Increase the separation between the equipment and receiver.
・ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
・ Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the device.
005