Mopping Function - Verefa V60M Pro Gebrauchsanleitung

◉
Auto-Empty dirt
- Auto emptying :
- After cleaning, the robot will return to the charging base, and the robot will automatically
empty the dust box according to the emptying frequency set in the app.
- The emptying frequency can be adjusted in the app.
- Manual emptying :
- When the robot is connected to the charging base, you can press the recharge button of the
robot or remote control to start manual emptying.
Note :
- If auto emptying is not needed, disable this feature in the app.

4.2 Mopping function

◉
Mopping
- The user can realize the mopping function by installing the mopping module and adding water to
the water tank.
- When the mopping module is installed, the Robot Vacuum automatically activate the mopping
function. The user can adjust the water amount in the APP, as well as set Only Mopping Mode
during the cleaning process.
1
Fill the water tank with water
- Take out the dust box and water tank combo module.
- Open the water tank cap, fill tank with water and close it tightly.
Note:
- Do not use detergent and disinfectant to avoid corroding the water tank and blocking the water
outlet.
- Do not fill with hot water, as it may cause deformation of the water tank.
- Reinstall the combo Module
017