Verefa V60M Pro Gebrauchsanleitung Seite 26

3) Clean the mopping module
Press the mopping module buttons to take out the mopping module.
1
Remove the mop pad from the mop bracket.
2
Wash the mop pad and hang it to dry.
3
1
3
4) Clean roller brush and roller brush cover
Press and hold the roller brush cover buckles on both sides inward, and take out the roller brush
1
cover and roller brush.
2
Cut off the hair wound on the roller brush with the blade of the cleaning brush.
3 The roller brush bearing on the side of the roller brush can be removed to clear any hair wound in
the gap.
Clean the dirt on the roller brush cover.
4
Install the roller brush and the roller brush cover back.
5
1
2
2
024
3