Verefa V60M Pro Gebrauchsanleitung Seite 31

Error 12: Robot trapped. Please
clear obstacles around.
Error 13: Charging base blocked.
Robot -
Please clear it.
Solid Red
Error 14: Charging error. Please
wipe the charging contacts.
Error F1: Side brush module fault.
Please check and try restarting the
system.
Error F2: Roller brush module fault.
Please check and try restarting the
system.
Robot -
Alternately
Flashing Red
and White
Error F3: Vacuum fan module fault.
Please check and try restarting the
system.
Error F4: Wheel module fault.
Please check and try to restart the
system.
- The robot may be stuck or trapped. Please clear
obstacles around the robot.
- The area around the charging base may be blocked
by obstacles or dust. Please clean the area around
and wipe the charging base location beacon area.
- Please wipe the charging contact pins of the robot
and the charging contacts of the charging base
with a dry cloth.
- Please check whether side brush is entangled
with dirt. Please remove, clean and reinstall the
side brush, and then try to turn off and then turn
on the system.
- If the fault persists, please contact our customer
service.
- Please check whether the roller brush is entangled
with dirt. Please remove, clean and reinstall the
roller brush then try to turn off and then turn on
the system.
- If the fault persists, please contact our customer
service.
- Please check whether the dust box, filter or dust
suction port is blocked by dirt. Please clear them,
and then try to turn off and then turn on the
system.
- If the fault persists, please contact our customer
service.
- Please check whether the wheel is entangled with
dirt. Please clean it, and then try to turn off and
then turn on the system.
- If the fault persists, please contact our customer
service.
029