Verefa V60M Pro Gebrauchsanleitung Seite 18

◉
Recharge
- Automatic mode: When the cleaning is completed or the battery is low during auto cleaning, the
robot will automatically return to the charging base to charge.
- Manual mode : When the cleaning is paused, press the recharge button to start recharge, or
enable it in the app.
Note :
- If the robot fails to return to the charging base, manually place the robot back to the charging base
for charging.
- The indicator light will pulse white when the robot is being charged.
◉
Spot cleaning
- In standby mode or when the cleaning is paused, press
the Spot cleaning button to start Spot Cleaning. The robot
will clean a specific area with a diameter of 1.2m in a spiral
pattern. After cleaning, the robot will automatically return
to the starting point and finish the work.
Note :
- Starting spot cleaning when there are other tasks will
directly end the previous cleaning task.
◉
Schedule cleaning (only set via the app)
- You can schedule cleaning in the app. The robot will automatically start cleaning at the specified
time and automatically return to the charging base after cleaning.
Note :
- When the scheduled time arrives during a cleaning session, the last cleaning task will be ended.
◉
Suction level
- For best cleaning effect, select different suction levels according to your needs.
- The greater the suction, the shorter the cleaning time and higher the noise.
- It can be set with the remote control and in the app.
◉
Auto-boost (only set via the app)
- During cleaning, the robot will automatically increase the suction power if it detects that stronger
power is needed to ensure the best clean, such as thick carpets and hard-to-clean messes.
- This function will reduce the cleaning time and increase the noise level. If the increased noise
disturbs you, you can disable this feature in the app.
1.2m
016
1.2m