Verefa V60M Pro Gebrauchsanleitung Seite 23

◉
Magnetic boundary strip (sold separately)
- With the magnetic boundary strip, the robot
can identify and avoid entering a specific
area. For example, place the magnetic
boundary strip in front of the door to prevent
the robot from entering a room, or place the
boundary strip around any pet drinking basin,
toy area or complex wires to prevent the robot
from crossing in.
1
Identify the area to be isolated with magnetic boundary
strip. Cut the boundary strip to a shorter length. Be sure to
correctly measure the length before cutting. Keep a
distance of at least 5cm from the separated items and
areas to avoid your robot crossing over and touching them.
2
Place the magnetic boundary strip flat on the floor. Use
an adhesive tape if it needs to be fixed.
Note :
- Ensure that the magnetic boundary strip is placed
flat and on the same surface of your robot.
- If the magnetic boundary strip is rolled up, remove
and then re-apply on the floor with adhesive tape.
Otherwise the boundary strip may not work well.
- This function can only be used to divide the area,
not to block any dangerous area.
- Do not place the magnetic boundary strip under
any thick carpet, otherwise the robot vacuum
cleaner may not recognize the boundary strip.
021
Magnetic boundary strip