Verefa V60M Pro Gebrauchsanleitung Seite 28

8) Clean sensors, charging contact pins and charging contacts
1 Wipe and clean the sensors with a soft dry cloth.
Note :
- There are sensitive electronic components inside the product. Please wipe them with a soft dry cloth
when cleaning. Do not use wet rags to prevent damage caused by water.
9) Replace the dust bag of auto-empty charging base, and clean the dust collection port and filter
When the dust bag is full, replace the dust bag according to the indicator light of the auto-empty
charging base or the prompt of your mobile client. It is advisable to replace the dust bag once a
month.
1
Open the dust bag cover of auto-empty charging base.
2
Pull up the handle of dust bag and take out the dust bag.
Note :
- When taking out the dust bag, the clip of dust bag handle will automatically close the dust bag
to effectively prevent dust leakage.
3 Discard the used dust bag.
Wipe the filter in the bucket and the dust collection port on the outside with a soft dry cloth.
4
5
Install a new dust bag, push the clip along the guide rail.
6 Close the top cover of charging base.
026