Operating Instructions; Main Functions - Verefa V60M Pro Gebrauchsanleitung

4.1 Main functions

◉
Turn on/off
- Press and hold the power button for 3 seconds to turn on the robot. The power indicator lights up.
Press and hold the power button for 3 seconds again, and the robot will turn off.
Note :
- The robot cannot be turned off during charging.
◉
Start cleaning (Auto cleaning)
- Press the power button, and the robot will clean your rooms
in sequence, following a Z-shaped cleaning method. Then it
will clean along the walls in an orderly and efficient way.
After cleaning, the robot will automatically return to the
charging base for charging.
Note :
- If the power is too low to start cleaning, charge the robot
first and then start cleaning.
- If the power is insufficient during cleaning, the robot will automatically return to the charging base
for charging. After fully charged, it will resume cleaning from where it left off.
- If the cleaning area is less than 4 m² , the robot will clean twice by default.
- Please tidy up all wires on your floor (including the power cable of the charging base) before
cleaning to avoid power failure and damage to the items or wires caused by dragging during
cleaning.
◉
Pause/resume/sleep
- When the robot is working, press any button to pause it, and press the power button to continue
cleaning.
- If standby exceeds 10 minutes, the robot will automatically enter the sleep mode. In the sleep
mode, the power indicators are all off. Press any button to wake up the robot in sleep mode.
Note :
- If the robot is placed back to the charging base for charging, the current cleaning task will be ended.
- To continue cleaning task, place the robot in its original position to avoid path confusion.
- The robot will not enter the sleep mode during charging.

4. Operating Instructions

015