Verefa V60M Pro Gebrauchsanleitung Seite 15

3
Connect the robot to the charging base and
turn it on.
- After connecting to the power supply, attach
the robot to the charging base by aligning
the charging contact pins. The robot will turn
on automatically.
Note :
- When the battery level is insufficient to turn on the robot, place the robot on the charging base for
a period of time, and the device will turn on automatically.
- If the robot is not on the charging base, press and hold the power button for 3 seconds to turn it
on.
4 Fully charged.
- Fully charge the robot before first use.
Note :
- It is recommended to charge the robot for at least 4-6 hours before first use. The robot will not
start or return for recharge without enough power.
4) Connect to mobile client
Note :
- Make sure your smartphone is running iOS 9.0 (or above) or Android 5.0 (or above).
- Make sure the 2.4GHz band wireless signal is enabled on your wireless router and the signal is
strong.
- To ensure better connection quality, please turn on the Bluetooth of your mobile phone.
1 Download the app.
- Search for the "Verefa Life" app in the app store.
Then download and install it.
2
Reset Wi-Fi.
- Press and hold both buttons (
until you hear the voice prompt. The three indicators on the robot start to flash slowly, indicating
that the robot is ready for pairing.
Verefa Life
Spot Cleaning button and
013
Align with the charging
contact pins.
Charging base Robot
Recharge button) for 3 seconds