2
Install the mop pad
- Wet the mop pad and wring it out until it does not drip. Place the mop bracket on the reverse side,
insert the mop pad along the mop bracket slot, and stick it firmly.
3
Install the mopping module
- Push the mopping module with the mop pad installed in parallel along the back of the Robot
Vacuum, and install it in place when a "click" sound is heard.
Click
4
Start cleaning
- Start the cleaning task, and the mopping function will be performed at this time.
5
Remove the mopping module
- When the Robot Vacuum finishes working and returns to the charging base, press the bottons
on both sides and take out the mopping module backwards.
018