Changing Your Pin Number; Setting The Display Language - AUDIOLINE DECT 5500 Bedienungsanleitung

7.10 Changing your PIN number

Some of the telephone system's functions are protected from unauthorised use by a PIN
number. The PIN number has four digits. The phone is delivered with the PIN number set
to "0000". To change the PIN number, proceed as follows:
1. Press the menu button,
2. Use and
3. Use and
4. Now enter the current four-digit PIN number using the number buttons (factory
setting, 0 0 0 0), then press
5. Now enter the desired four-digit PIN number using the number buttons, then press
.
6. Now confirm the change by entering the new four-digit PIN number again, then
press .
7. You can then select further menu functions or exit by holding down
If the old PIN number entered is not correct the procedure will be broken off.

7.11 Setting the display language

The display can be set to give indications in English, French or German.
1. Press the menu button,
2. Use and
3. Use and
4. Use and
5. After a short pause, the language setting will change and the display will revert to
the 'ready' state.
- Special Functions -
.
to select the SETUP menu, then press
to select the PIN CODE function, then press
.
.
to select the HANDSET menu, then press
to select the LANGUAGE function, then press
to select a language, then press
.
.
.
.
.
.
59