Special Functions; Setting Ring Melodies On The Handset; Setting The Ring Melody Volume - AUDIOLINE DECT 5500 Bedienungsanleitung

7.

Special functions

Any further programming functions can be accessed through a very user-friendly menu.
We give here a short, general description of navigation in this menu:
To begin programming, press the
be shown in the display.
The and buttons are used to search through the function groups.
The group indicated in the display is selected by pressing
The and buttons are now used to search for the desired individual function which
is again selected by pressing
The button can be used to move back one level in the selection process.
Any store function will be automatically broken off if no entry is made within 15 seconds.
The button can be held down at any time to exit altogether from programming
without making any changes.
Chapter 7.13 gives a complete summary of the menu.
7.1

Setting ring melodies on the handset

Your handset can use five different melodies to signal an incoming call. If you are
operating the telephone with several handsets, you can set up different melodies for
internal and external calls.
1. Press the menu button,
2. Use and
3. Use and
(melody for internal calls) and then press
4. Use and
5. You can then select further menu functions or exit by holding down
7.2

Setting the ring melody volume

The volume of the handset ring melody can be set to one of five levels. If, at any time,
you do not wish to be disturbed, you can also turn off the ringing altogether. If the
ringing is turned off, incoming calls will only be signalled by the base station and on the
handset display.
- Special Functions -
button. During programming, the
.
.
to select the HANDSET menu, then press
to select EXT MEL (melody for external calls) or INT MEL
to select the desired melody, then press
.
.
.
.
symbol will
.
55