Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.8
Activating/Deactivating warning tones
Here, various warning tones can be activated or deactivated.
Button click: Each time a button is pressed, the handset confirms with a button click. The
button click can be switched on or off.
Warning tone for low battery: If the battery capacity is too low, a warning tone will remind
you that you must charge the handset.
Range warning: If you are too far away from the base station, a warning tone will remind
you that you are losing contact with the base station.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the BEEP function with
4.
Select one of the functions KEYTONE, LOW BATTERY or OUT RANGE with
and confirm with
5.
Switch the selected warning tone on or off with
6.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.9
Changing the PIN code
Some functions of the telephone system are protected against unauthorised use by a PIN
code. The PIN code consists of four numbers. As supplied, the PIN code is set to "0000". To
change the PIN code, proceed as follows:
1.
Press the menu button
2.
Select the SETUP menu with
3.
Select the PIN CODE function with
4.
Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0 0)
and confirm with
5.
Now enter the new four-digit PIN code using the number pad and confirm with
6.
Now enter the new four-digit PIN code once more for confirmation and confirm with
.
7.
Now select further menu functions or exit the menu by pressing and holding the
button.
If the old PIN code is not entered correctly, the process will be aborted.
- Special functions -
.
and
and
and confirm with
.
.
and
and confirm with
and
.
and confirm with
and
and confirm with
.
and confirm with
.
.
and
.
.
.
59
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
