T-Net Operation / Pbxs; R" Button With Pbxs; R" Button And The Deutsche Telekom T-Net; Setting The Flash Time - AUDIOLINE DECT 5500 Bedienungsanleitung

6.

T-NET operation / PBXs

If your telephone is connected to a private branch exchange or you have the DEUTSCHE
TELEKOM T-Net functions available, you can make use of the "R" button on your
telephone.
6.1

"R" button with PBXs

If you have connected your AUDIOLINE DECT 5500 to a PBX, you can use all the special
functions such as call forwarding and automatic call-back. These can be accessed using
the "R" button. For a PBX, a FLASH time of 100 ms is required (setting, see 6.3). To
check whether your telephone will function correctly with your PBX, consult the supplier
of the PBX.
6.2

"R" button and the DEUTSCHE TELEKOM T-Net

Your AUDIOLINE telephone supports the main additional services from DEUTSCHE
TELEKOM (such as three way calling, call waiting and three way conference). T-Net works
with a FLASH time of 300 ms (setting, see 6.3). To make the T-Net functions available,
please consult DEUTSCHE TELEKOM.
6.3

Setting the FLASH time.

1. Press the menu button,
2. Use and
3. Use and
4. Use and
.
5. To exit from the entry mode, hold down the
6.4

Outside line number

With some older PBXs, an outside call is made by dialling a particular digit (e.g. "9" or
"0") and then waiting for the exchange dial tone before continuing to dial. Once it has
been set up for your PBX, your AUDIOLINE DECT 5500 automatically inserts a dialling
pause after the outside line prefix. Two different digits can be set as outside line prefix.
Special notice: If your telephone is not connected to a PBX, do not make any of the
following settings.
- T-NET/ PBXs -
.
to select the SETUP menu, then press
to select the FLASH function, then press
to select FLASH 1 (100ms) or FLASH 2 (300ms) and then press
.
.
button.
53