Changing The Pin Code - AUDIOLINE DECT4000R Bedienungsanleitung

Note: The digit to be pressed appears on the right side of the display
of the handset to be deregistered.
4. Confirm by pressing the
5. Enter the base station PIN code using
the digit keys (default setting: 0000).
6. Press the
process.
7. Confirm by pressing the
8. An acoustic signal is issued after a few seconds in the case of
successful deregistration. N REG appears in the display of the
deregistered handset. The handset is now deregistered and
can no longer be used for internal and external calls.
10.1.5

Changing the PIN code

The registration and deregistration of handsets are protected against
unauthorised use by a PIN code. The PIN code can comprise of up to
eight digits. When delivered, the PIN code is "0000". Proceed as follows
to change the PIN code:
1. Press the Menu button
2. Press the
3. Enter the base station PIN code using
the digit keys (default setting: 0000).
Note: If the old PIN code is not entered
correctly, the process is cancelled.
4. Confirm by pressing the
5. Enter the new PIN code using the digit
keys and confirm the entry by pressing
F
the
- Multiple Handsets -
C button to cancel the
8
button.
button.
F
button.
F button.
F .
F
button.
ldqtumv
PIN?
kjieghf
ldqtumv
000000000)(0
kjieghf
ldqtumv
PIN?
kjieghf
ldqtumv
NEUE PIN
kjieghf
89