Setting Up Conference Calls; Ringing Priority - AUDIOLINE DECT 5500 Bedienungsanleitung

8.3

Setting up conference calls

You can connect a second internal handset with an external call to set up a three-way
conference. To connect two handsets with an external call:
set up the desired connection with the external caller. Then press the
by the number of the handset being called. Once the second internal caller has answered,
press the # button for 2 seconds and all three callers will be connected in a conference
call.
8.4

Ringing priority

When using a number of handsets, one handset can be set to ring before all the others.
You can also select the base station if, for example, you have a cord telephone connected
in parallel. In this case, it is the telephone and base station that ring first, before the
handsets. Even when a handset does not ring, the incoming call is visually indicated and
can be taken from the handset.
Switching ring priority on and off
1. Press the menu button,
2. Use and
3. Use and
will indicate whether this function is switched on or off.
4. You can now use
or off.
5. Press the
6. You can then select further menu functions or exit by holding down
Allocating the priority
1. Press the menu button,
2. Use and
3. Use and
4. Use and
5. Use and
then press
rings before the general ring.
6. Use and
display will show PRIORITY.
7. You can then select further menu functions or exit by holding down
- Several Handsets -
.
to select the SETUP menu, then press
to select the PRIORITY function, then press
and to choose whether this function is to be switched on
button again.
.
to select the SETUP menu, then press
to select the PRIORITY function, then press
to select SELECT, then press
to choose between HANDSET (1-5) and BASE (the base station),
. The display will show RINGS (1-9) to indicate the number of
to select the desired number of rings, then press
button followed
.
. The display
.
.
.
.
. The
.
63