Registering And De-Registering Handsets; Registering Handsets; De-Registering Handsets - AUDIOLINE DECT 5500 Bedienungsanleitung

8.5

Registering and de-registering handsets

8. 5.1

Registering handsets

1. Hold down the paging button,
twice. You now have 90 seconds to register the new handset.
2. Press the
3. Use and
4. Now use the number buttons to enter the number of the base station (1 - 4). If the
handset is already registered with a base station, the corresponding numbers will
blink.
5. Press the
6. Now enter the PIN number for the base station (factory setting, 0 0 0 0).
7. Now press the menu button,
The handset is now registered and can be used for external and internal calls.
8. An internal number will now have been allocated to the handset. The first handset
registered (main handset) has the internal number 1. Any further handsets that are
registered are allocated internal numbers (2 to 5) in the order of registration. This
internal number is shown in the display to the right of the name.
8. 5.2

De-registering handsets

A handset can only be de-registered from another handset that is registered. It is thus
not possible to make a de-registration from the handset that is to be de-registered.
1. Press the
2. Use and
3. Use and
4. Now enter the PIN number for the base station (factory setting, 0 0 0 0), then press
.
5. Use and
.
6. The OK prompt will appear in the display. You can now complete de-registration by
pressing the
If de-registration is completed, a beep will be heard after a few seconds. The
handset is now de-registered and can no longer be used with this base station.
64
- Several Handsets -
button on the handset.
to select the REGISTER menu, then press
button again.
button on the handset.
to select the SETUP menu, then press
to select DEL HS, then press
to select the number of the handset to be de-registered, then press
button or cancel the de-registration by holding the button down.
on the base station for 10 seconds until it beeps
, and you will hear a beep for a few seconds.
.
.
.