Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.4.3
Logging off mobile units
A mobile unit can only be logged off using another mobile unit that is still logged-on. It is
therefore not possible to carry out the logging-off procedure using the mobile unit that is to
be logged off.
1.
Press the
2.
Select the SETTINGS menu with
3.
Select the DEL HS menu with
4.
Now select the number 1 or 2 of the mobile unit to be logged off and confirm with the
button.
5.
Now enter the current four-digit PIN code using the number pad (factory setting
0 0 0 0) and confirm with
button. If the logging-off is successful, after a few seconds you will hear a signal
tone. The mobile unit is now logged off and can no longer be used for external and
internal calls.
8.4.4
Changing the PIN code
The logging on and logging off of mobile units is protected against unauthorised use by
means of a PIN code. The PIN code consists of four numbers. As supplied, the PIN code is
set to "0000". To change the PIN code, proceed as follows:
1.
Press the menu button
2.
Select the SETTINGS menu with
3.
Select the PIN CODE menu with
4.
Now enter the current four-digit PIN code using the number pad (factory setting 0 0 0
0) and confirm with
5.
Now enter the new four-digit PIN code using the number pad and confirm with
6.
Now enter the new four-digit PIN code once more for confirmation and confirm with
.
7.
Now select further menu functions or exit the menu by pressing and holding the
button.
If the old PIN code is not entered correctly, the process will be aborted.
NOTE: If you should ever forget your PIN code, you will only be able to reset this with the
help of our service hotline.
54
Downloaded from
www.Manualslib.com
- Special functions -
button on the mobile unit.
. You can abort the process by pressing the
.
.
manuals search engine
and
and confirm with
and
and confirm with
and
and confirm with
and
and confirm with
.
.
.
.
.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
