Muting The Handset Microphone; Setting The Speaker Volume; Redial - AUDIOLINE DECT 5500 Bedienungsanleitung

3.7

Muting the handset microphone

You can use the
then speak without being heard over the telephone (secret function). The speaker in the
handset remains switched on so that you can still hear your caller.
1. Press the
display.
2. To turn the microphone back on, press the
word MUTE will disappear from the display and you can continue your call as usual.
3.8

Setting the speaker volume

If you find the speaker too loud or too quiet, this can be adjusted to your taste.
During a call, you can use the buttons,
volume setting will be shown in the Display as EAR VOL (1 to 5).
3.9

Redial

The redial function is especially useful if a number is engaged or the person called does
not answer. Your AUDIOLINE DECT 5500 stores the last five numbers called.
1. Press the
display.
2. By pressing the
called. Use the
3. Now press the call button,
Notice: If a number in the redial list matches a phonebook entry, the entry name will
replace the number in the display.
46
- Normal Use -
button to turn off the handset microphone during a call. You can
button briefly, once during a call. The word MUTE will appear in the
or the button and the last number called will appear in the
or the button again, you can display the previous number
button to move through the list in the other direction.
, to dial the number shown in the display.
button briefly, once again. The
and , to adjust the speaker volume. The