Selecting A Base Station; Changing The Pin Code; Default Settings - AUDIOLINE DECT6800 Bundle Bedienungsanleitung

14.2

Selecting a base station

You can use the handset to manually select the base station to be used to make calls.
It is also possible to define settings ensuring the handset automatically establishes a
connection with the bases stations within range. The handset then automatically
registers on the nearest base station. In order for the automatic transfer of the
handsets from one base station to another to work properly, the respective handset
must be registered on all the base stations via which calls should be taken and made.
Further information on the use of several base stations is provided in Chapter 16.
Select the base stations via which you want to make calls manually or activate the
automatic selection" function.
MENU , X SYSTEM , OK
X BASE SELECT , OK
Note: All the base stations on which the handset is registered are displayed in a
list.
or AUTO , OK
X BASE ...
14.3

Changing the PIN code

The registration and deregistration of handsets and numerous other functions
available on the telephone are protected against unauthorised use by a PIN code.
The PIN code can comprise of up to eight digits. The default setting of the PIN code is
0000". If you change a PIN code, keep a note of the new PIN code in a safe place.
Some telephone functions are only available after entering the valid PIN code. If you
forget or lose the PIN code, please contact our Service Hotline (refer to Chapter 18).
Proceed as follows to change the PIN code:
MENU , X SYSTEM , OK
X CHANGE PIN , OK
Z, OK
Note: If the old PIN code is entered incorrectly, the process is cancelled and the
message WRONG PIN
Z, OK
Z, OK
14.4

Default settings

This function resets the handset and base station settings to their status on leaving
the factory. The default settings cannot be restored without entering the currently valid
PIN code. If you forget or lose the PIN code, please contact our Service Hotline (refer
to Chapter 18).
− System −
Select menu and confirm
Select function and confirm
Select the base station or automatic selection"
and confirm
Select menu and confirm
Select function and confirm
Enter the PIN code and confirm
appears in the display.
Enter the new PIN and confirm
Enter the new PIN again and confirm
99