Inhaltsverzeichnis
Werbung
▪ Unwrap model
Take out the model cautiously with foil (fig. 1).
▪ Operating instructions
Operating instructions: Before use is advisable to let the loco go around about 30 minutes
forwards an 30 minutes backwards without load, to obtain an optomal circuit and best tractive
power.
The smallest radius this model should run is R2 of the ROCO track system (R2 = 358 mm).
Your locomotive will run smoothly on clean tracks only. For this purpose we recommend using
item no. 46400, ROCO track cleaning van, or item no. 10002, ROCO track cleaning rubber,
for removing heavy dirt.
▪ Fittings
In the enclosed accessory bag you will find small kits to be fitted on your locomotive (fig. 2).
Please mount them cautiously.
Fig. 1
24
24
5500002.indd 24
5500002.indd 24
Starting locomotive operation
17.07.2023 11:17:16
17.07.2023 11:17:16
Werbung
Inhaltsverzeichnis
