To enjoy your model for a long time, it is necessary to service it regulary (i.e. after it has been in
operation for approximately 30 hours).
▪ Remove body
see fig. 3
▪ Cleaning of the wheel contacts
Wheel contacts easily get dirty on tracks which are not entirely clean. Use a small brush to
remove dirt from spots marked in fig. 4.
▪ Lubrication
Apply tiny oil drops to spots marked in fig. 5. Prior to lubrication dismantle locomotive (fig. 3).
We recommend using item no. 10906, Roco oiler. For lubrication the gearparts (e.g. cogwheels,
worm) we whould recommended our Roco special grease (item no. 10905).
▪ AC pick up (only for 5520002)
see fig. 6
Fig. 3
26
26
5500002.indd 26
5500002.indd 26
Maintenance of the model
17.07.2023 11:17:16
17.07.2023 11:17:16