Operation; Menu Structure - EuroLite AKKU IP UP-4 Entry QCL Spot QuickDMX Montageanleitung

OPERATION

Turn on the device via the power switch. The display indicates the last operating mode. The operating
modes can be selected by means of the display and the control buttons. All settings remain stored even if
the device is disconnected from the mains. The device can be operated in stand-alone mode via the control
board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any commercial DMX controller
and QuickDMX with suitable wireless transmitter.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER.
Mode
DMX mode
Preset colors
Automatic mode
Running speed in
automatic mode
Color mix
Dimmer
Fading
Strobe effect
Behaviour in case of
missing DMX signal
Slave mode
ECO PRO
Key lock
Wireless 2.4 G
IR remote control
Firmware version
Display
9CH
6CH
DMX 5CH
4CH
3CH
STATIC
AUTO
SPEED
R000-255
G000-255
COLOR
B000-255
W000-255
DIMMING
FADING
FLASH
DMX lost
SLAVE SLAVE MODE
ECO
PASSCODE
SET 2.4 G
ON/OFF
INFRARED
V1.0
28/36
ADDR:001-512 9-channel mode and start address
ADDR:001-512 6-channel mode and start address
ADDR:001-512 5-channel mode and start address
ADDR:001-512 4-channel mode and start address
ADDR:001-512 3-channel mode and start address
01-19 Constant lighting in one of 19 colors
01-09 Auto Program
Program running speed
01-09
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Total brightness
01-99
dark > bright
Fading program
00-99
slow > fast
Strobe effect
00-99
slow > fast
Blackout LEDs go off
Hold Spot holds the last received signal
Full All LEDs 100% on
STATIC Pre-selected static color 01-19
Auto Pre-selected auto program 01-09
Slave mode
OFF Regular mode
ON Energy saving mode
Key lock on
ON
Key lock off
OFF
Red
Green
Blue
Transmission channel wireless DMX
R+G
G+B
R+B
ON IR remote control on
OFF IR remote control off
V1.0 Firmware version number
Function
00133497, Version 1.1