Cleaning And Maintenance - EuroLite AKKU IP UP-4 Entry QCL Spot QuickDMX Montageanleitung

9-channel mode
Channel
CH1
Master dimmer
CH2
Strobe effect
CH3
CH4
CH5
CH6
CH7
Preset colors
CH8
Auto programs
CH9
Running speed
for auto programs

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Value Function
000 – 255 Total brightness 0-100 %
000 – 009 No function
010 – 255 Strobe slow > fast (0-100%)
000 – 255 Red 0-100%
000 – 255 Green 0-100%
000 – 255 Blue 0-100%
000 – 255 White 0-100%
000 – 009 No function
010 – 019 Red
020 – 029 Green
030 – 039 Blue
040 – 049 White
050 – 059 Yellow
060 – 069 Magenta
070 – 079 Cyan
080 – 089 Dark orange
090 – 099 Green yellow
100 – 109 Salmon
110 – 119 Turquoise
120 – 129 Light green
130 – 139 Orange
140 – 149 Straw
150 – 159 Lavender
160 – 169 Light blue
170 – 179 Dark blue
180 – 189 Pink
190 – 255 Full on
000 – 009 No function
010 – 034 Auto program 1
035 – 059 Auto program 2
060 – 084 Auto program 3
085 – 109 Auto program 4
110 – 134 Auto program 5
135 – 159 Auto program 6
160 – 184 Auto program 7
185 – 209 Auto program 8
210 – 255 Auto program 9
000 – 255 Running speed internal programs, increasing
33/36 00133497, Version 1.1