Stand-Alone Mode - EuroLite AKKU IP UP-4 Entry QCL Spot QuickDMX Montageanleitung

Stand-alone mode

Preset colors
In the STATIC mode the device will constantly emit one of 19 preset colors.
1 Press the MENU button so many times until STATIC is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Automatic mode
In automatic mode, 9 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until AUTO is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (01 – 09). Confirm with the
ENTER button.
2 Press the MENU button so many times until SPEED is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from 01 (slow) to 09
(fast). Confirm with the ENTER button.
Color mix
In COLOR mode the 4in1 LEDs can be adjusted in intensity. The device will then constantly emit the chosen
color setting.
1 Press the MENU so many times until COLOR is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter R for the color red and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3 Confirm with the ENTER button. Now the color green can be set; then blue and white until the desired
color intensity is achieved.
Total brightness
Menu item DIMMING allows adjusting the total brightness for all stand-alone operating modes.
1 Press the MENU button so many times until DIMMING is indicated in the display. Confirm with the
ENTER button.
2 Use the buttons UP and DOWN to adjust the desired brightness (01 = dark, 99 = bright). Confirm with
the ENTER button.
Color fading
FADING mode enables color fading. The speed is adjustable.
1 Press the MENU button so many times until FADING is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired speed (00-99). Confirm with the ENTER button.
Strobe effect
FLASH mode enables strobe effects. The flash frequency is adjustable.
1 Press the MENU button so many times until FLASH is indicated in the display Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired speed (00-99). Confirm with the ENTER button.
Behavior at missing DMX-signal
In DMX lost mode the program offers different options when no DMX signal is received.
1 Press the MENU button repeatedly until the display shows the DMX lost menu. Press ENTER to
confirm.
2 Select the desired program with the UP and DOWN buttons (see Menu structure). Confirm with ENTER.
29/36 00133497, Version 1.1